ZBSC-611 total loss 8.0 8.2 8.4 8.6 8.8 9.0 10 48 86 124 162 200 frequency (mhz) total loss (db) s-1(db) s-3(db) s-5(db) ZBSC-611 isolation 20 30 40 50 60 10 48 86 124 162 200 frequency (mhz) isolation (db) 1-2(db) 1-3(db) 5-6(db) typical performance data electrical specifcations maximum ratings coaxial connections sum port s port 1,2,3,4,5,6 1,2,3,4,5,6 operating temperature -55c to 100c storage temperature -55c to 100c power input (as a splitter) 1w max. internal dissipation 0.5w max. outline drawing outline dimensions ( ) inch mm ZBSC-611 6 way-0 50 ? 10 to 200 mhz power splitter/combiner rev. b m151107 ZBSC-611 hy/td/cp 151016 coaxial abcde f 3.50 2.00 .50 .150 3.350 1.00 88.90 50.80 12.70 3.81 85.09 25.40 g h j k wt .125 1.75 .20 .55 grams 3.18 44.45 5.08 13.97 120 case style: uu102 connectors model sma ZBSC-611 features ? low insertion loss, 0.7 db typ. ? good isolation, 28 db typ. ? excellent amplitude unbalance, 0.1 db typ. ? good vswr, 1.2:1 typ. ? rugged shielded case applications ? vhf ? instrumentation ? radio communication electrical schematic ZBSC-611 vswr 1.00 1.07 1.14 1.21 1.28 1.35 10 48 86 124 162 200 frequency (mhz) vswr #s vswr #1 vswr #3 vswr permanent damage may occur if any of these limits are exceeded. 1. total loss = insertion loss + 7.8db splitter loss. ht-series tight spot sma wrench from $24.95 l = low range [f l to 10 f l ] m = mid range [10 f l to f u /2] u= upper range [f u /2 to f u ] freq. range (mhz) isolation (db) insertion loss (db) above 7.8 db phase unbalance (degrees) amplitude unbalance (db) f l -f u l m u l m u l m u l m u ty p. min. ty p. min. ty p. min. ty p. max. ty p. max. ty p. max. max. max. max. max. max. max. 10-200 28 22 26 20 23 20 0.5 0.8 0.7 1.0 0.9 1.2 4 5 6 0.2 0.3 0.5 frequency (mhz) total loss 1 (db) amplitude unbalance (db) isolation (db) phase unbal. (deg.) vswr s vswr 1 vswr 3 s-1 s-2 s-5 1-2 1-3 5-6 10.00 8.17 8.17 8.18 0.01 43.26 39.05 42.55 0.15 1.17 1.07 1.08 14.00 8.18 8.18 8.19 0.02 43.23 39.09 42.34 0.19 1.17 1.07 1.07 25.00 8.21 8.22 8.23 0.01 42.79 38.94 41.68 0.26 1.16 1.07 1.07 40.00 8.25 8.25 8.25 0.01 42.29 38.45 40.76 0.37 1.15 1.07 1.07 55.00 8.28 8.29 8.28 0.02 41.84 37.92 39.84 0.43 1.14 1.07 1.07 70.00 8.32 8.33 8.31 0.02 41.16 37.32 38.84 0.59 1.14 1.08 1.07 85.00 8.36 8.36 8.35 0.02 40.31 36.75 37.86 0.90 1.13 1.09 1.07 100.00 8.39 8.39 8.37 0.02 39.13 36.21 36.80 0.87 1.11 1.09 1.06 115.00 8.41 8.42 8.39 0.03 37.71 35.71 35.80 1.04 1.09 1.09 1.06 130.00 8.43 8.45 8.42 0.04 36.13 35.35 34.65 1.15 1.07 1.10 1.07 145.00 8.49 8.50 8.46 0.05 34.46 35.06 33.47 1.27 1.06 1.11 1.08 155.00 8.53 8.54 8.49 0.06 33.42 34.88 32.67 1.49 1.06 1.11 1.08 165.00 8.55 8.55 8.51 0.07 32.35 34.67 31.81 1.50 1.05 1.11 1.07 180.00 8.57 8.58 8.51 0.07 30.73 34.46 30.47 1.51 1.03 1.11 1.07 200.00 8.62 8.63 8.55 0.10 28.73 34.26 28.81 1.70 1.06 1.11 1.07 notes a. performance and quality attributes and conditions not expressly stated in this specifcation document are intended to be excluded and do not form a part of this specifcation document. b. electrical specifcations and performance data contained in this specifcation document are based on mini-circuits applicable established test performance criteria and measurement instructions. c. the parts covered by this specifcation document are subject to mini-circuits standard limited warranty and terms and conditions (collectively, standard terms); purchasers of this part are entitled to the rights and benefts contained therein. for a full statement of the standard terms and the exclusive rights and remedies thereunder, please visit mini-circuits website at www.minicircuits.com/mclstore/terms.jsp mini-circuits ? www.minicircuits.com p.o. box 350166, brooklyn, ny 11235-0003 (718) 934-4500 sales@minicircuits.com
|